#Schlage keypad lock manual manual
#Schlage keypad lock manual code

Hold battery tray in place while loosening screw. Remove screw on upper left to release upper battery tray. 2ģ Replacing the Batteries BE369 Deadbolt a.

#Schlage keypad lock manual manual

See Manual Programming Functions on page 5 for instructions to disable this feature. The Turn Lock feature is enabled by default.

#Schlage keypad lock manual code

Turn Lock Feature When the Turn Lock feature (available on BE369 Deadbolt only) is disabled, a valid user code must be entered at the keypad in order to lock the lock from the outside. If you add a new code to the lock manually, the new code will be displayed on the web portal with an assigned name of New User (#), which can be changed at any time. User codes are assigned to names in the web portal and can be changed, added or deleted using the web portal. May be added and deleted manually, using the keypad. The web interface is not affected by a change to the programming code. See Restoring Factory Settings on page 4 for more information. If you change your programming code and then forget it, you can reset your lock back to factory settings. See Vacation Mode on page 4 for more information. CAN be used to take a lock out of vacation mode at the keypad. See Manual Programming Functions on page 5 for more information. Can only be changed by manually using the keypad. Used to put the lock into enrollment mode. Programming Code Used to manually program the lock using the keypad. An identical label is also located on the inside (part that faces the door) of the keypad. All pre-programmed codes can be found on the yellow sticker on the front of the Installation Instructions that come with the lock. The programming code and user codes can be changed at any time. BE369 Deadbolt FE599 Lever LockĢ Programming and User Codes All locks are pre-programmed with a programming code and two user codes. Lights only when an inside button is pressed. Lights green when inside unlock button is pressed. Lights red when inside lock button is pressed. Lock and Unlock Light On the FE599 Lever Lock only. When these buttons are used, the lock will remain locked or unlocked until locked or unlocked using the buttons, web interface or phone application. Used to put the lock in a locked or unlocked state. Lock and Unlock Buttons On the FE599 Lever Lock only. See Emergency Key Override on page 6 for more information. Used only in emergency situations to unlock the lock. Cylinder Located on the outside of the lock.

The outside lever can be rotated at any time, but will only retract the latch when the lock is unlocked. The inside lever can be rotated at any time to retract the latch. The outside thumbturn can also be rotated to extend the bolt after the Schlage button has been pressed when Turn Lock feature is enabled. The outside thumbturn can be rotated to retract the bolt after a valid user code has been entered. The inside thumbturn may be rotated at any time to retract (unlock) or extend (lock) the bolt. Used to enter codes for programming and unlocking. 6 Lock Parts Keypad Located on the outside of the lock. 1 Schlage Wireless Locks User Guide Contents Programming and User Codes.